Real NS0-164 Exam Questions are the Best Preparation Material
Practice on 2026 LATEST NS0-164 Exam Updated 263 Questions
NEW QUESTION # 74
Alter a SnapRestore reversion of a volume, incremental backup and restore operations on the file or volume cannot rely on the timestamps to determine what data needs to be backed up or restored. Which one of the following is the most likely course of action to take to ensure correct incremental backups?
- A. Reboot the storage appliance to reset timestamps back to their original times before the reversion.
- B. Take a new snapshot of the volume to create new base-level timestamps for the incremental backup.
- C. First perform choice c and then choice a.
- D. Perform a base-level backup of the volume after you restore it.
Answer: D
NEW QUESTION # 75
Refer to the exhibit.
An administrator creates a new qtree and an associated export policy. When the client tries to connect, they are denied.
What should the administrator do?
- A. Update the superuser entry lo "any" in the volume export-policy
- B. Add the new host IP with at least read access to the volume export-policy
- C. Add a new rule in the qtree export policy in allow read-write access for the new host
- D. Replace the IP with the client hostname in the qtree export policy
Answer: C
NEW QUESTION # 76
Data ONTAP uses inodes in an active file system to reference__________________.
- A. snapshots
- B. qtrees
- C. disk blocks
- D. file segments
Answer: C
NEW QUESTION # 77
After an unexpected ONTAP node reboot, an administrator notices that the NAS data LIFs are not on their home port.
Which UF configuration would modify this behavior?
- A. -auto-revert
- B. -failover-group
- C. -service-policy
- D. -home-port
Answer: A
NEW QUESTION # 78
Which FC network feature must be enabled on a switch port to support FC LIFs?
- A. Link Aggregation Control Protocol (LACP).
- B. N _ Port ID virtualization (NPIV).
- C. unified target adapter (UTA).
- D. quality of service (QoS).
Answer: B
NEW QUESTION # 79
Which statement about Advanced Disk Partitioning is true?
- A. Root partitions can be assigned to any node in a cluster.
- B. Data partitions can be assigned to any node in a cluster.
- C. Both nodes must have a root partition assigned.
- D. Both nodes must have a root partition or a data partition assigned.
Answer: C
NEW QUESTION # 80
Which two protocols provide NAS access for home directories on an $VM? (Choose two.)
- A. NFS
- B. iSCSI
- C. FC
- D. NVMe/TCP
- E. SMB
Answer: A,E
NEW QUESTION # 81
Snapshot copies for SnapLock volumes are deleted automatically according to the retention count set in the Snapshot schedule.
- A. True
- B. False
Answer: A
NEW QUESTION # 82
In a fabric-attached MetroCluster, hardware disk ownership by a node is determined by which two factors (Choose two.)
- A. what types of disks are used in the cluster
- B. what types of ports are on the HBA
- C. which switch ports the controller and disks are connected to
- D. the location of the HBA or onboard port
- E. the system ID of the controller
- F. how the disks are configured by the administrator
Answer: C,D
NEW QUESTION # 83
Which tool can be used to deploy Cloud Volumes ONTAP?
- A. Conflg Advisor
- B. CloudCheckr
- C. Active IQ
- D. BlueXP
Answer: D
NEW QUESTION # 84
You have quiesced a volume to stabilize the contents of a destination just prior to a snapshot.
What is the next logical command that you would issue after the snapshot is complete?
- A. snapmirror quiesce-q
- B. snapmirror restart
- C. options snapmirror.log enable off
- D. snapmirror resume
Answer: D
NEW QUESTION # 85
Which two protocols provide NAS access for home directories on an S VM? (Choose two.)
- A. NFS
- B. iSCSI
- C. FC
- D. NVMe/TCP
- E. SMB
Answer: A,E
NEW QUESTION # 86
When adding an iSCSI initiator identifier to an initiator group, which identifier should you use?
- A. host bus adaptor (HBA) worldwide node name (WWNN).
- B. Target Portal Group (TPG) tag.
- C. software initiator iSCSl Qualified Name (IQN).
- D. host bus adapter (HBA) worldwide port name (WWPN).
Answer: C
NEW QUESTION # 87
Which one of the following commands is used to specify the destination appliance(s) that are allowed to replicate (pull) data from the source appliance?
- A. options snapmirror.access
- B. snapmirror release
- C. options snapmirror.allow
- D. snapmirror initialize
Answer: A
NEW QUESTION # 88
Fill in the blank for the following statement using the best answer from the choices that follow. A snapshot is a frozen, read-only image of the entire Data ONTAP file system that reflects the state of the____________at the time the snapshot was created.
- A. file system
- B. qtrees
- C. storage appliance
- D. directory
Answer: A
NEW QUESTION # 89
In an ONTAP based unified storage system, which asymmetrical logical unit access (ALUA) state is indicated as the preferred path?
- A. active nonoptimized.
- B. active optimized.
- C. active active.
- D. optimized.
Answer: B
NEW QUESTION # 90
Which one of the following does SnapRestore revert?
- A. RAID group size
- B. Volume option settings
- C. File content
- D. Snapshot schedules
Answer: C
NEW QUESTION # 91
An administrator is troubleshooting connection problems with ONTAP System Manager. The cluster management L1F is on port aOa-33. Web clients on VLAN 33 are able to access System Manager. Web clients on other subnets are unable to reach System Manager.
Which network component should the administrator modify?
- A. Interface group
- B. VLAN
- C. Route
- D. IPspace
Answer: C
NEW QUESTION # 92
Which one of the following statements does not apply to Nearstore Personality?
- A. Converts the destination storage system to a Nearstore system
- B. The feature is available to all NetApp storage systems
- C. This feature requires the nearstore_option license on the destination storage system
- D. Provides increased concurrent streams when the storage systems are used as destinations for SnapMirror and SnapVault transfers
Answer: B
NEW QUESTION # 93
Which types of data compression are available in NetApp ONTAP software?
- A. inline and postprocess.
- B. inline and external.
- C. inline and preprocess.
- D. inline and reclaimable.
Answer: A
NEW QUESTION # 94
A SnapVault secondary volume can contain up to ______________ Snapshot copies for data protection.
- A. 0
- B. 1
- C. 2
- D. Depends on capacity and number of disk drives
Answer: B
NEW QUESTION # 95
By which method does unified replication enhance data protection?
- A. combining mirror capabilities and vault capabilities.
- B. optimizing storage space for archived data.
- C. simplifying the retention process.
- D. automating the disaster recovery process.
Answer: A
NEW QUESTION # 96
Which three intervals does NetApp ONTAP software follow when creating cluster configuration backup files? (Choose three.).
- A. every 8 hours.
- B. every hour.
- C. monthly.
- D. daily.
- E. weekly.
- F. every 12 hours.
Answer: A,D,E
NEW QUESTION # 97
......
Authentic NS0-164 Exam Dumps PDF - Jun-2026 Updated: https://pass4sures.realvce.com/NS0-164-VCE-file.html