Verified HPE6-A72 exam dumps Q&As with Correct 107 Questions and Answers
HP HPE6-A72 Test Engine PDF - All Free Dumps from RealVCE
NEW QUESTION # 43
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION # 44
Refer to the exhibit.
What configuration is needed in order for "show LLDP configuration" to show this output?
- A. none; LLDP is enabled by default on Aruba switches
- B. configuring LLDP globally only
- C. configuring LLDP both globally and on the interfaces
- D. enabling LLDP on the interfaces only
Answer: A
NEW QUESTION # 45
Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)
- A. copy running-config startup-config
- B. copy config config1 config startup-config
- C. copy running-config checkpoint boot-config
- D. write memory
- E. save
Answer: A,D
NEW QUESTION # 46
With what other technology does Half Duplex communication closely match?
- A. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
- B. CB radio using push-to-talk
- C. a mobile phone call
- D. point-to-point connections between two switches allowing concurrent transmit and receive
Answer: B
NEW QUESTION # 47
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION # 48
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:

NEW QUESTION # 49
What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)
- A. HTTPS
- B. USB-C console
- C. SNMPv2c
- D. SSH
- E. Telnet
Answer: A,D
NEW QUESTION # 50
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1# no ssh server vrf default Core-1# no https-server vrf default
- B. Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default
- C. Core-1(config)# no ssh server Core-1(config)# no https-server
- D. Core-1(config)# no ssh server enable Core-1(config)# no https-server enable
Answer: B
NEW QUESTION # 51
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
- A. Core(config-if-vlan)# vrf attach Green
- B. Core(config-if-vlan)# ip vpn-instance Green
- C. Core(config-if-vlan)# ip vrf forwarding Green
- D. Core(config-if-vlan)# routing-context Green vrf
Answer: A
NEW QUESTION # 52
Place the OSI Layers in the correct order. Arrange them from least to greatest, starting with Layer 1 on the top, and progressing to Layer 7 on the bottom.
Answer:
Explanation:
Explanation:
Graphical user interface, application Description automatically generated
NEW QUESTION # 53
What does link aggregation provide? (Select two.)
- A. improved bandwidth between switches
- B. no load balancing
- C. disables spanning-tree between switches
- D. faster convergence than spanning-tree
- E. support for up to 2 active ports to be bundled together
Answer: A,D
NEW QUESTION # 54
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION # 55
Which network category applies to a SOHO internal network?
- A. SD-WAN
- B. WAN
- C. LAN
- D. Internet
Answer: D
NEW QUESTION # 56
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command show running-configuration
- B. The command show system
- C. The command inventory
- D. The command version
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION # 57
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)
- A. Gaining the flexibility to connect the Data-Center to any Access layer switch.
- B. Lowering the cost of a deployment due to needing less switches overall.
- C. Better scalability in a campus with a large number of buildings.
- D. Offloading processing from the Core without routing at the Access layer.
- E. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
Answer: C,D
NEW QUESTION # 58
Refer to the exhibit.
Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?
- A. 0
- B. 01001011
- C. 1
- D. 2
Answer: C
NEW QUESTION # 59
What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)
- A. Area ID
- B. Priority
- C. Hello and Dead intervals
- D. Process ID
- E. Router ID
Answer: A,C
NEW QUESTION # 60
ServiceOS login: admin
SVOS> password
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?
- A. No password is set for this account.
- B. "forgetme!"
- C. "password"
- D. The same login password that has lost originally.
Answer: B
NEW QUESTION # 61
Core(config)# user admin password
Core(config)# interface mgmt
Core(config-if-mgmt)# ip static 10.254.16.89/22
Core(config-if-mgmt)# default-gateway 10.254.19.129
Core(config)# ssh server vrf mgmt
Core(config)# https-server vrf mgmt
You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.
Which two steps are missing? (Choose two.)
- A. Core(config-if-mgmt)# no shutdown
- B. Core(config)# https-server rest access-mode read-write
- C. Core(config-if-mgmt)# enable
- D. Core(config)# https-server rest access-mode read-only
- E. Core(config-if-mgmt)# no tftp-server
Answer: A,B
NEW QUESTION # 62
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2
2/1/28 Access-2(vsf-member-1)# exit
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2 This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answer: B
NEW QUESTION # 63
Refer to the exhibit.
The Aruba 8400 in the exhibit is member 2 of a VSX stack.
Which command will enter the interface sub configuration mode for the port, indicated by the orange square?
- A. 8400(config)# interface 2/3/17
- B. 8400(config)# interface 1/7/16
- C. 8400(config)# interface 1/4/15
- D. 8400(config)# interface 2/4/15
Answer: D
NEW QUESTION # 64
Refer to the exhibit.
Which command produces the above output?
- A. show interface port 1/1/10 switchport
- B. show vlan port 1/1/10
- C. show interface port 1/1/10 trunk
- D. show trunk port 1/1/10 extended
Answer: D
NEW QUESTION # 65
Refer to the exhibit
Which command on Access-2 port 1/1/4 will enable connectivity between PC-1 and Server-1 without any routing enabled in the network?
- A. Access-2 (config-if-1/1/4)# vlan 20 untag 1/1/4
- B. Access-2 (config-if-1/1/4)# vlan access 20
- C. Access-2 (config-if-1/1/4)# vlan access 1, 10, 20, 255
- D. Access-2 (config-if-1/1/4)# vlan trunk allow 1, 10, 255
Answer: B
NEW QUESTION # 66
......
100% Passing Guarantee - Brilliant HPE6-A72 Exam Questions PDF: https://pass4sures.realvce.com/HPE6-A72-VCE-file.html